PodcastsEducationHackaday Podcast

Hackaday Podcast

Hackaday
Hackaday Podcast
Latest episode

375 episodes

  • Hackaday Podcast

    Ep 364: Clocks, Cameras, and Free Will

    03/04/2026 | 48 mins.
    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so.
    In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you can rest assured that the talks will be announced soon. The Green-Powered Challenge is still underway, and we need your entry to truly make it a contest. You have until April 24th to enter, so show us what you can do with power you scrounge up from the environment!
    As usual, we published a handful of April Fool's posts, which you may or may not find amusing. And finally -- no fooling -- our own Tom Nardi wrote up the Artemis moon launch, and is going to update the post every day until the mission ends.
    On What's That Sound, we can score one for Kristina, which brings her record to approximately three wins and sixty-eight losses. She knew without a doubt that the dialogue was from the Day the Earth Stood Still (1951). Oh, what? There was a remake in 2008? Kristina should get bonus points, then.
    After that, it's on to the hacks, beginning with the basics of making clean enclosures that are decidedly not 3D-printed, a couple of sweet lo-fi cameras, and a nice way to tame the tape when it comes to SMT parts. We also discuss a clock that marks time in a mathematical way, watch an electro-permanent magnet in action, and improving soda by turning it into mead. Finally, we discuss the solar balconies taking Europe by storm, and Copilot's terrifying terms of service.
    Check out the links over on Hackaday to follow along, and as always, tell us what you think about this episode in the comments!
  • Hackaday Podcast

    Ep 364: Clocks, Cameras, and Free Will

    03/04/2026 | 48 mins.
    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so.
    In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you can rest assured that the talks will be announced soon. The Green-Powered Challenge is still underway, and we need your entry to truly make it a contest. You have until April 24th to enter, so show us what you can do with power you scrounge up from the environment!
    As usual, we published a handful of April Fool's posts, which you may or may not find amusing. And finally -- no fooling -- our own Tom Nardi wrote up the Artemis moon launch, and is going to update the post every day until the mission ends.
    On What's That Sound, we can score one for Kristina, which brings her record to approximately three wins and sixty-eight losses. She knew without a doubt that the dialogue was from the Day the Earth Stood Still (1951). Oh, what? There was a remake in 2008? Kristina should get bonus points, then.
    After that, it's on to the hacks, beginning with the basics of making clean enclosures that are decidedly not 3D-printed, a couple of sweet lo-fi cameras, and a nice way to tame the tape when it comes to SMT parts. We also discuss a clock that marks time in a mathematical way, watch an electro-permanent magnet in action, and improving soda by turning it into mead. Finally, we discuss the solar balconies taking Europe by storm, and Copilot's terrifying terms of service.
    Check out the links over on Hackaday to follow along, and as always, tell us what you think about this episode in the comments!
  • Hackaday Podcast

    Ep 364: Clocks, Cameras, and Free Will

    03/04/2026 | 48 mins.
    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so.
    In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you can rest assured that the talks will be announced soon. The Green-Powered Challenge is still underway, and we need your entry to truly make it a contest. You have until April 24th to enter, so show us what you can do with power you scrounge up from the environment!
    As usual, we published a handful of April Fool's posts, which you may or may not find amusing. And finally -- no fooling -- our own Tom Nardi wrote up the Artemis moon launch, and is going to update the post every day until the mission ends.
    On What's That Sound, we can score one for Kristina, which brings her record to approximately three wins and sixty-eight losses. She knew without a doubt that the dialogue was from the Day the Earth Stood Still (1951). Oh, what? There was a remake in 2008? Kristina should get bonus points, then.
    After that, it's on to the hacks, beginning with the basics of making clean enclosures that are decidedly not 3D-printed, a couple of sweet lo-fi cameras, and a nice way to tame the tape when it comes to SMT parts. We also discuss a clock that marks time in a mathematical way, watch an electro-permanent magnet in action, and improving soda by turning it into mead. Finally, we discuss the solar balconies taking Europe by storm, and Copilot's terrifying terms of service.
    Check out the links over on Hackaday to follow along, and as always, tell us what you think about this episode in the comments!
  • Hackaday Podcast

    Ep 363: The History of PLA, Laser DIY PCBs, and Corporate Craziness

    27/03/2026 | 1h 10 mins.
    What did Elliot Williams and Al Williams read on Hackaday last week? Tune in and find out. After a bit of news, [Vik Oliver] chimes in with some deep PLA knowledge. Then the topic changed to pressure advance measurements, SDRs, making super-resolution PCBs with a fiber laser, and more.
    Want to 3D print wire strippers? A robot arm? Or just make your own Z-80? Those hacks are in there, too.
    For the long articles, we talked about old tech, including the :CueCat and the Iomega Zip Drive. Let us know if you had either one in the comments.
    What do you think? Leave us a comment or record something and send it to our mailbag.
  • Hackaday Podcast

    Ep 362: Compression Molding, IPv4x, and Wired Headphones

    20/03/2026 | 57 mins.
    As the sun goes down on a glorious spring evening on the western edge of Europe, Elliot Williams is joined by Jenny List for a look at the week in all things Hackaday.
    First up: Hackaday Europe tickets are on sale! Bad luck folks, the early bird tickets disappeared in an instant, but regular ones are still available for now. We're really looking forward to making our way to Lecco for a weekend of hacks, and it would be great to see you there too.
    Then we have a new feature for the podcast, the Hackaday Mailbag. This week's contribution comes from [Kenny], a longtime friend of Hackaday and probably our most regular conference attendee.
    To the hacks, and we have some good ones. An air hockey robot might not seem like a challenge, but the engineering which went into [BasementBuilds'] one proves it's not a job for the faint hearted. Then we look at compression molding of recycled plastic using 3D-printed molds, something that seems surprisingly accessible and we'd like to try, too. We've got a new DOS, a 3D-printed zipper repair, the IPv4 replacement we didn't get, and the mind-bending logic of ternary computing. It's one of those weeks where the quick hacks could all deserve their own in-depth look, but perhaps the stand-outs are and Arduino style compiler that includes the source code compressed within the binary, and a beautifully-done revival of a 1980s brick cellphone as a modern 5G unit.
    Finally in the longer reads we've got an examination of wired versus Bluetooth headphones -- we're both in the wired camp -- and a look back at the age of free dialup. As is so often the case, the experience there differed between Brits and Americans. Anyway, enjoy the episode, and we have another week to look forward to.

More Education podcasts

About Hackaday Podcast

Hackaday Editors take a look at all of the interesting uses of technology that pop up on the internet each week. Topics cover a wide range like bending consumer electronics to your will, designing circuit boards, building robots, writing software, 3D printing interesting objects, and using machine tools. Get your fix of geeky goodness from new episodes every Friday morning.
Podcast website

Listen to Hackaday Podcast, The Jefferson Fisher Podcast and many other podcasts from around the world with the radio.net app

Get the free radio.net app

  • Stations and podcasts to bookmark
  • Stream via Wi-Fi or Bluetooth
  • Supports Carplay & Android Auto
  • Many other app features

Hackaday Podcast: Podcasts in Family